Name: Jim Dunlop MXR Bass Chorus Deluxe Pedal
Brand: JIM DUNLOP
SKU: 56b5f4754813ef4d3dff1ec6ec4b4105
Price: 699 AED
Availability: InStock

Jim Dunlop MXR Bass Distortion Pedal

The Bass D.I.+ features a D.I., separate clean and distortion channels, an array of controls to fine-tune your sound, and a noise gate trigger control to eliminate hum and hiss.This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power supplies (not included).Input Impedance 2.2 MΩOutput ImpedanceUnbalanced 150 ΩBalanced 300 ΩBypass Freq. Response+0/-0.5 dB, 20 Hz to 20 kHzTone ControlsBass ±18 dB, 60 HzMid ±10 dB, 850 HzTreble ±12 dB, 4 kHzNoise Floor*Bypass -102 dBVClean Effect -98 dBVDistortion Effect, Gate Off -94 dBVDistortion Effect, Gate On -98 dBVVolume Control Range 40 dBGate Trigger Range 28 dBSensitivity -66 dBV at 1 kHzBypass BufferedCurrent Draw 9 mAPower Supply 9 volts DC

699.-

Jim Dunlop MXR Bass Compressor Pedal

The Bass Compressor provides recording-quality compression with Constant Headroom Technology and true bypass switching for keeping your low end tight and clean.This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick, Iso-Brick, and Mini Iso-Brick power supplies (not included).Directions:Run a cable from your bass to the Bass Compressor's INPUT jack and run another cable from the Bass Compressor's OUTPUT jack to your amplifier.Set RELEASE, ATTACK, OUTPUT and INPUT controls to 12 o'clock and the RATIO control to 4.Turn the effect on by depressing the footswitch.Observe the METER display while playing normally and set the INPUT knob so that the first 3 to 7 green gain reduction LEDs light, clockwise to light more and counterclockwise to light less LEDs.Rotate the OUTPUT knob clockwise to increase overall effect volume or counterclockwise to decrease it.Rotate the ATTACK knob clockwise to increase reaction time of compression or counterclockwise to de…

699.-

Jim Dunlop MXR Micro Chorus Guitar Pedal

The Micro Chorus allows you to quickly dial up a stunning range of old-school bucket-brigade chorus sounds with a single Rate control.This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick, Iso-Brick, and Mini Iso-Brick power supplies (not included).Directions:Run a cable from your guitar to the Micro Chorus' INPUT jack and run another cable from the Micro Chorus' OUTPUT jack to your amplifier.Turn the Micro Chorus effect on by depressing the footswitch; the red LED will illuminate, indicating that the effect is activated.Turn the RATE knob clockwise to increase the chorus speed towards a watery shimmer, counterclockwise for a slower rotating sound.Input Impedance 1 MΩOutput Impedance 1 kΩ, 1 kHzMax Input Level -5 dBV, 500HzMax Output Level +8 dBVRate Control 0.25 Hz, 7.5 HzNoise Floor* -89 dBVDelay Time 4.2 ms, 6.8 msFrequency ResponseDelayed Signal 20 Hz to 4.5 kHzDry Signal 20 Hz to 20 kHzBypass True HardwireCurrent Draw 5 mAPower Supply 9 vol…

329.-

Jim Dunlop MXR Carbon Copy Deluxe Analog

The Carbon Copy Deluxe Analog Delay features extended delay time with tap tempo functionality, optional modulation, a switch to toggle between the warm sound of the original pedal and vibrant sound of the Bright version, and much more.This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power supplies (not included).Input Impedance 1MΩOutput Impedance 1 kΩMaximum Output Level +8dBVNoise Floor* -96 dBVDelay Time 40ms to 1200msNoise Reduction 2:1 ratioModulation Speed 0.1 Hz to 10 HzTap Divisions Dotted 8th, 8th, Triplet, 16thBright** 1.5 kHz, +4.5 dB200 Hz, -3 dBBypass True HardwireCurrent Draw 22 mA***44 mA****Power Supply DC 9 volts

869.-

Jim Dunlop MXR M102 Dyna Comp Compressor Pedal

The Dyna Comp Compressor can tighten up your signal, add rich sustain, or create the percussive and clicky sound heard on numerous hit records.This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power supplies (not included).Input Impedance 1 MΩOutput Impedance 10 kΩNominal Input Level -5 dBVNominal Output Level -12 dBVNoise Floor* 95 dBVT.H.D 0.2% Typ. at -20 dBV, 1 kHzMax Compression 36 dBAttack Time 5 msRelease Time 1 sBypass True HardwireCurrent Draw 3.3 mAPower Supply 9 volts DC

339.-

Jim Dunlop Micro Amp Pedal

The Micro Amp allows you to boost your signal with a preset amount of gain up to +26dB.This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick, Iso-Brick, and Mini Iso-Brick power supplies (not included).Directions:Run a cable from your guitar to the Micro Amp's INPUT jack and run another cable from the Micro Amp's OUTPUT jack to your amplifier.Start with the control at 12 o'clock.Turn the effect on by depressing the footswitch.Rotate the GAIN knob clockwise to increase amount of signal boost or counterclockwise to decrease it.Input Impedance 1 MΩOutput Impedance 470 ΩMaximum Output Level +6 dBVNoise Floor* -80 dBVGain Control +0.5 dB to +26 dBFreq. Response 20 Hz to 20 kHz,+0 dB, -1.4 dBBypass HardwireCurrent Draw 2.5 mAPower Supply 9 volts DC

329.-

Jim Dunlop MXR M294 Sugar Drive Overdrive Pedal

Based on a rare and elusive circuit, the MXR Sugar Drive Pedal provides a diverse range of clear and transparent overdrive tones, from sauced up boosting to blown-tube distortion.This pedal can be powered by a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power supplies (not included).Input Impedance 600 kΩOutput Impedance 3 kΩNominal Input Level +6 dBVMaximum Output LevelTrue Bypass without Buffer selected+26 dBVTone control (@ full CCW): -20 dB @ 3 kHzCurrent Draw 18.5 mA @ 9 VDCPower Requirements 9 VDC (ECB003 AC adapter)Throughput Gain up to +50 dB @ 1kHz

469.-

Jim Dunlop Pedal Mxr Bass Overdrive

The Bass Overdrive delivers burly overdriven tones with a Clean control to blend in a pre-set EQ clean signal.This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power supplies (not included).Input Impedance 1 MΩOutput Impedance95 dBCurrent Draw 19 mAPower Supply 9 volts DC

519.-

Jim Dunlop Pedal Mxr Bass Overdrive

519.-

Jim Dunlop MXR Carbon Copy Analog Delay

The Carbon Copy Analog Delay delivers rich, warm bucket-bridgade delay with up to 600ms of delay time and modulation.This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power supplies (not included).Input Impedance 1 MΩOutput Impedance 1 kΩMax Input Level +5 dBV at 500 HzMax Output Level +8 dBVNoise Floor*Mix at Max CW -96 dBVMix at Max CCW -104 dBVDelay Distortion

569.-

Jim Dunlop MXR Bass Chorus Deluxe Pedal

Shops offering this product

Related products

Customer reviews from Jim Dunlop MXR Bass Chorus Deluxe Pedal

More about Jim Dunlop MXR Bass Chorus Deluxe Pedal

Product description

Product specifications

Explore related categories