Name: Jim Dunlop Germanium Fuzz Face Mini Distortion
Brand: JIM DUNLOP
SKU: 2d9ec79d4288967b0d9bce12ca9b256a
Price: 499 AED
Availability: InStock

Jim Dunlop Silicon Fuzz Face Mini Distortion

This Fuzz Face Mini Distortion sounds bright and aggressive thanks to vintage spec silicon transistors, with a status LED, AC power jack, battery door, and mini housing for modern convenience.This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power supplies (not included).Input Impedance 10 kΩOutput ImpedanceMax Volume

499.-

Jim Dunlop Joe Bonamassa Fuzz Face Mini Pedal

This Fuzz Face Mini Distortion features the same thick, creamy fuzz tones as the JBF3B in a smaller housing, with a status LED, AC power jack, and battery door for modern convenience.This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick, Iso-Brick, and Mini Iso-Brick power supplies (not included).Directions:Run a cable from your guitar to the FFM4's INPUT jack and another cable from the FFM4's OUTPUT jack to your amplifier.Start with both controls at 12 o'clock.Turn the effect on by depressing the footswitch.Rotate the VOLUME knob clockwise to increase overall effect volume or counterclockwise to decrease it.Rotate the FUZZ knob clockwise to increase amount of fuzz or counterclockwise to decrease it.Input Impedance 10 kΩOutput ImpedanceMax Volume 16 kΩ-6 dB Volume* 126 kΩMax Gain 45 dBBypass True HardwireCurrent Draw 2 mAPower Supply 9 volts DC

479.-

Jim Dunlop MXR Carbon Copy Deluxe Analog

The Carbon Copy Deluxe Analog Delay features extended delay time with tap tempo functionality, optional modulation, a switch to toggle between the warm sound of the original pedal and vibrant sound of the Bright version, and much more.This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power supplies (not included).Input Impedance 1MΩOutput Impedance 1 kΩMaximum Output Level +8dBVNoise Floor* -96 dBVDelay Time 40ms to 1200msNoise Reduction 2:1 ratioModulation Speed 0.1 Hz to 10 HzTap Divisions Dotted 8th, 8th, Triplet, 16thBright** 1.5 kHz, +4.5 dB200 Hz, -3 dBBypass True HardwireCurrent Draw 22 mA***44 mA****Power Supply DC 9 volts

869.-

Jim Dunlop MXR M294 Sugar Drive Overdrive Pedal

Based on a rare and elusive circuit, the MXR Sugar Drive Pedal provides a diverse range of clear and transparent overdrive tones, from sauced up boosting to blown-tube distortion.This pedal can be powered by a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power supplies (not included).Input Impedance 600 kΩOutput Impedance 3 kΩNominal Input Level +6 dBVMaximum Output LevelTrue Bypass without Buffer selected+26 dBVTone control (@ full CCW): -20 dB @ 3 kHzCurrent Draw 18.5 mA @ 9 VDCPower Requirements 9 VDC (ECB003 AC adapter)Throughput Gain up to +50 dB @ 1kHz

469.-

Jim Dunlop MXR Bass Distortion Pedal

The Bass D.I.+ features a D.I., separate clean and distortion channels, an array of controls to fine-tune your sound, and a noise gate trigger control to eliminate hum and hiss.This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power supplies (not included).Input Impedance 2.2 MΩOutput ImpedanceUnbalanced 150 ΩBalanced 300 ΩBypass Freq. Response+0/-0.5 dB, 20 Hz to 20 kHzTone ControlsBass ±18 dB, 60 HzMid ±10 dB, 850 HzTreble ±12 dB, 4 kHzNoise Floor*Bypass -102 dBVClean Effect -98 dBVDistortion Effect, Gate Off -94 dBVDistortion Effect, Gate On -98 dBVVolume Control Range 40 dBGate Trigger Range 28 dBSensitivity -66 dBV at 1 kHzBypass BufferedCurrent Draw 9 mAPower Supply 9 volts DC

699.-

Jim Dunlop Micro Amp Pedal

The Micro Amp allows you to boost your signal with a preset amount of gain up to +26dB.This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick, Iso-Brick, and Mini Iso-Brick power supplies (not included).Directions:Run a cable from your guitar to the Micro Amp's INPUT jack and run another cable from the Micro Amp's OUTPUT jack to your amplifier.Start with the control at 12 o'clock.Turn the effect on by depressing the footswitch.Rotate the GAIN knob clockwise to increase amount of signal boost or counterclockwise to decrease it.Input Impedance 1 MΩOutput Impedance 470 ΩMaximum Output Level +6 dBVNoise Floor* -80 dBVGain Control +0.5 dB to +26 dBFreq. Response 20 Hz to 20 kHz,+0 dB, -1.4 dBBypass HardwireCurrent Draw 2.5 mAPower Supply 9 volts DC

329.-

Jim Dunlop Pedal Mxr Bass Overdrive

The Bass Overdrive delivers burly overdriven tones with a Clean control to blend in a pre-set EQ clean signal.This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power supplies (not included).Input Impedance 1 MΩOutput Impedance95 dBCurrent Draw 19 mAPower Supply 9 volts DC

519.-

Jim Dunlop Pedal Mxr Bass Overdrive

519.-

Jim Dunlop MXR Micro Chorus Guitar Pedal

The Micro Chorus allows you to quickly dial up a stunning range of old-school bucket-brigade chorus sounds with a single Rate control.This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick, Iso-Brick, and Mini Iso-Brick power supplies (not included).Directions:Run a cable from your guitar to the Micro Chorus' INPUT jack and run another cable from the Micro Chorus' OUTPUT jack to your amplifier.Turn the Micro Chorus effect on by depressing the footswitch; the red LED will illuminate, indicating that the effect is activated.Turn the RATE knob clockwise to increase the chorus speed towards a watery shimmer, counterclockwise for a slower rotating sound.Input Impedance 1 MΩOutput Impedance 1 kΩ, 1 kHzMax Input Level -5 dBV, 500HzMax Output Level +8 dBVRate Control 0.25 Hz, 7.5 HzNoise Floor* -89 dBVDelay Time 4.2 ms, 6.8 msFrequency ResponseDelayed Signal 20 Hz to 4.5 kHzDry Signal 20 Hz to 20 kHzBypass True HardwireCurrent Draw 5 mAPower Supply 9 vol…

329.-

Jim Dunlop MXR M117R Flanger Guitar Pedal

The MXR Flanger creates a variety of wild sounds from dynamic jet plane or cool space effects to short delay, chorus and vibrato.This pedal can be powered by two 9-volt batteries, a 18-volt adapter or the DC Brick, Iso-Brick and Mini Iso-Brick power supplies.Directions:Run a cable from your guitar to the Flanger's INPUT jack and run another cable from the Flanger's OUTPUT jack to your amplifier.Start with all controls at 12 o'clock.Turn the effect on by depressing the footswitch.Rotate the MANUAL control clockwise to emphasize higher frequencies or counterclockwise to emphasize lower frequencies.Rotate the WIDTH control clockwise to increase the intensity of the time delay as set by the SPEED control or counterclockwise to decrease it.Rotate the SPEED knob clockwise for a faster phase effect or counterclockwise for a slower phase effect.Rotate the REGEN. control clockwise to increase the overall intensity of the effect or counterclockwise to decrease it.Input Impedance 470 kΩOutput Imp…

619.-

Jim Dunlop Germanium Fuzz Face Mini Distortion

Shops offering this product

Related products

Customer reviews from Jim Dunlop Germanium Fuzz Face Mini Distortion

More about Jim Dunlop Germanium Fuzz Face Mini Distortion

Product description

Product specifications

Explore related categories