The Dunlop Jimi Hendrix Fuzz Face Mini Distortion Pedal features the same legendary fuzz face tone in a much more compact size. Based on the classic JHF1 Hendrix Fuzz Face pedal,it gives you the same thick, smooth Fuzz Face tone from its toneful BC108 silicon transistor. The Dunlop Jimi Hendrix Fuzz Face Mini Distortion Pedal also includes modern enhancements: true bypass switching and a bright status LED. If you're a Hendrix or Fuzz Face fan, the Dunlop Jimi Hendrix Fuzz Face Mini Distortion Pedal is the perfect choice for you.Pedal Type: FuzzInputs: 1 x InstrumentOutputs: 1 x 1/4"Power Source: 9V DC power supply required (sold separately)Batteries: 1 x 9V
569.-
Jim Dunlop Mesh Steel Gray Strap
Dunlop Mesh Straps are made from soft, comfortable fabric in rich, dark colors.
109.-
Jim Dunlop MXR Bass Compressor Pedal
The Bass Compressor provides recording-quality compression with Constant Headroom Technology and true bypass switching for keeping your low end tight and clean.This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick, Iso-Brick, and Mini Iso-Brick power supplies (not included).Directions:Run a cable from your bass to the Bass Compressor's INPUT jack and run another cable from the Bass Compressor's OUTPUT jack to your amplifier.Set RELEASE, ATTACK, OUTPUT and INPUT controls to 12 o'clock and the RATIO control to 4.Turn the effect on by depressing the footswitch.Observe the METER display while playing normally and set the INPUT knob so that the first 3 to 7 green gain reduction LEDs light, clockwise to light more and counterclockwise to light less LEDs.Rotate the OUTPUT knob clockwise to increase overall effect volume or counterclockwise to decrease it.Rotate the ATTACK knob clockwise to increase reaction time of compression or counterclockwise to de…
699.-
Jim Dunlop MXR Distortion III
The Distortion III delivers everything from sweet singing overdrive to massive distortion crunch. This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power supplies (not included). Input Impedance 1 MΩOutput Impedance* 5.5 kΩNominal Intput Level -22 dBVMaximum Output Level +3 dBVNoise Floor** 84 dBVTone Control ±6.5 dB at 3 kHzDistortion Gain 22 dB to 50 dB, 1 kHzBypass True Hardwire Current Draw 3.5 mAPower Supply 9 Volts DC
389.-
Jim Dunlop MXR M102 Dyna Comp Compressor Pedal
The Dyna Comp Compressor can tighten up your signal, add rich sustain, or create the percussive and clicky sound heard on numerous hit records.This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power supplies (not included).Input Impedance 1 MΩOutput Impedance 10 kΩNominal Input Level -5 dBVNominal Output Level -12 dBVNoise Floor* 95 dBVT.H.D 0.2% Typ. at -20 dBV, 1 kHzMax Compression 36 dBAttack Time 5 msRelease Time 1 sBypass True HardwireCurrent Draw 3.3 mAPower Supply 9 volts DC
339.-
Jim Dunlop MXR Carbon Copy Analog Delay
The Carbon Copy Analog Delay delivers rich, warm bucket-bridgade delay with up to 600ms of delay time and modulation.This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power supplies (not included).Input Impedance 1 MΩOutput Impedance 1 kΩMax Input Level +5 dBV at 500 HzMax Output Level +8 dBVNoise Floor*Mix at Max CW -96 dBVMix at Max CCW -104 dBVDelay Distortion
569.-
Logitech ERGO M575 Wireless Trackball Mouse Graphite
Logitech ERGO M575 Wireless Trackball Mouse Graphite Easy thumb control, precision and smooth tracking, ergonomic comfort design, for Windows, PC and Mac with Bluetooth and USB capabilities - Graphite
249.-
-36%
Logitech ERGO M575 Wireless Trackball Mouse Graphite
Logitech ERGO M575 Wireless Trackball Mouse Graphite Easy thumb control, precision and smooth tracking, ergonomic comfort design, for Windows, PC and Mac with Bluetooth and USB capabilities - Graphite
249.-
159.-
Jim Dunlop MXR Timmy Overdrive Pedal
This pedal provides a huge, responsive range of gritty and textured tones that enhance the sound of your rig while preserving its fundamental character-and in an MXR mini housing, this pedal will free up some serious pedalboard space.This pedal can be powered by a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power suppliesInput Impedance 400 kΩOutput Impedance* 1 kΩNoise Floor* -115 dBVGain 3 dBV to 43 dBVBypass True HardwireCurrent Draw 2.2 mAPower Supply 9 volts DC
579.-
Customer reviews from Dunlop Ergo Lok Strap 1 pc
There are no reviews for this product yetWanna to be the first to leave a review?