Name: Jim Dunlop Slash Octave Fuzz Pedal
Brand: JIM DUNLOP
SKU: 42de7519c3b853eebbd8560089bac871
Price: 579 AED
Availability: InStock

Jim Dunlop Slash Octave Fuzz Pedal

The Slash Octave Fuzz combines searing fuzz with a sub octave grow and an array of controls for fine-tuning your sinister sound.This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power supplies (not included).Input Impedance 47 kΩOutput Impedance 100 ΩSignal to Noise* >85 dBDry Max Gain +1.6 dBFuzz Gain Range 40 dBOctave Up Gain Range 20 dBSub Octave Corner Freq. 149 HzBypass True HardwireCurrent Draw 17 mAPower Requirement 9 volts DC

579.-

Jim Dunlop MXR Blue Box Octave Guitar Pedal

The Blue Box Octave Fuzz drops your guitar signal two octaves down and combines it with gnarly fuzz for huge subterranean tones.This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick, Iso-Brick, and Mini Iso-Brick power supplies (not included).Directions:Run a cable from your guitar to the Blue Box's INPUT jack and run another cable from the Blue Box's OUTPUT jack to your amplifier.Turn the OUTPUT knob clockwise to BOOST the effect's overall volume.Rotate the OUTPUT knob to increase overall volume of effect or counterclockwise to decrease it.Rotate BLEND knob clockwise to increase amount of sub-octave fuzz or counterclockwise to decrease it.Input Impedance 1 MΩOutput Impedance100 dBVBypass HardwireCurrent DrawEffect On 4 mAEffect Off 1.5 mAPower Supply 9 volts DC0 dBV = 1Vrms

389.-

Jim Dunlop Joe Bonamassa Fuzz Face Mini Pedal

This Fuzz Face Mini Distortion features the same thick, creamy fuzz tones as the JBF3B in a smaller housing, with a status LED, AC power jack, and battery door for modern convenience.This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick, Iso-Brick, and Mini Iso-Brick power supplies (not included).Directions:Run a cable from your guitar to the FFM4's INPUT jack and another cable from the FFM4's OUTPUT jack to your amplifier.Start with both controls at 12 o'clock.Turn the effect on by depressing the footswitch.Rotate the VOLUME knob clockwise to increase overall effect volume or counterclockwise to decrease it.Rotate the FUZZ knob clockwise to increase amount of fuzz or counterclockwise to decrease it.Input Impedance 10 kΩOutput ImpedanceMax Volume 16 kΩ-6 dB Volume* 126 kΩMax Gain 45 dBBypass True HardwireCurrent Draw 2 mAPower Supply 9 volts DC

479.-

Jim Dunlop Germanium Fuzz Face Mini Distortion

This Fuzz Face Mini Distortion provides warm vintage fuzz tones thanks to mismatched germanium transistors, with a status LED, AC power jack, battery door, and mini housing for modern convenience.This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power supplies (not included).Input Impedance 10 kΩOutput ImpedanceMax Volume 2 kΩ-6 dB Volume 115 kΩMax Gain 45 dBBypass True HardwireCurrent Draw 3.4 mAPower Supply 9 volts DC

499.-

Jim Dunlop Silicon Fuzz Face Mini Distortion

This Fuzz Face Mini Distortion sounds bright and aggressive thanks to vintage spec silicon transistors, with a status LED, AC power jack, battery door, and mini housing for modern convenience.This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power supplies (not included).Input Impedance 10 kΩOutput ImpedanceMax Volume

499.-

Jim Dunlop MXR Bass Distortion Pedal

The Bass D.I.+ features a D.I., separate clean and distortion channels, an array of controls to fine-tune your sound, and a noise gate trigger control to eliminate hum and hiss.This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power supplies (not included).Input Impedance 2.2 MΩOutput ImpedanceUnbalanced 150 ΩBalanced 300 ΩBypass Freq. Response+0/-0.5 dB, 20 Hz to 20 kHzTone ControlsBass ±18 dB, 60 HzMid ±10 dB, 850 HzTreble ±12 dB, 4 kHzNoise Floor*Bypass -102 dBVClean Effect -98 dBVDistortion Effect, Gate Off -94 dBVDistortion Effect, Gate On -98 dBVVolume Control Range 40 dBGate Trigger Range 28 dBSensitivity -66 dBV at 1 kHzBypass BufferedCurrent Draw 9 mAPower Supply 9 volts DC

699.-

Jim Dunlop Micro Amp Pedal

The Micro Amp allows you to boost your signal with a preset amount of gain up to +26dB.This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick, Iso-Brick, and Mini Iso-Brick power supplies (not included).Directions:Run a cable from your guitar to the Micro Amp's INPUT jack and run another cable from the Micro Amp's OUTPUT jack to your amplifier.Start with the control at 12 o'clock.Turn the effect on by depressing the footswitch.Rotate the GAIN knob clockwise to increase amount of signal boost or counterclockwise to decrease it.Input Impedance 1 MΩOutput Impedance 470 ΩMaximum Output Level +6 dBVNoise Floor* -80 dBVGain Control +0.5 dB to +26 dBFreq. Response 20 Hz to 20 kHz,+0 dB, -1.4 dBBypass HardwireCurrent Draw 2.5 mAPower Supply 9 volts DC

329.-

Jim Dunlop MXR Bass Compressor Pedal

The Bass Compressor provides recording-quality compression with Constant Headroom Technology and true bypass switching for keeping your low end tight and clean.This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick, Iso-Brick, and Mini Iso-Brick power supplies (not included).Directions:Run a cable from your bass to the Bass Compressor's INPUT jack and run another cable from the Bass Compressor's OUTPUT jack to your amplifier.Set RELEASE, ATTACK, OUTPUT and INPUT controls to 12 o'clock and the RATIO control to 4.Turn the effect on by depressing the footswitch.Observe the METER display while playing normally and set the INPUT knob so that the first 3 to 7 green gain reduction LEDs light, clockwise to light more and counterclockwise to light less LEDs.Rotate the OUTPUT knob clockwise to increase overall effect volume or counterclockwise to decrease it.Rotate the ATTACK knob clockwise to increase reaction time of compression or counterclockwise to de…

699.-

Jim Dunlop MXR Timmy Overdrive Pedal

This pedal provides a huge, responsive range of gritty and textured tones that enhance the sound of your rig while preserving its fundamental character-and in an MXR mini housing, this pedal will free up some serious pedalboard space.This pedal can be powered by a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power suppliesInput Impedance 400 kΩOutput Impedance* 1 kΩNoise Floor* -115 dBVGain 3 dBV to 43 dBVBypass True HardwireCurrent Draw 2.2 mAPower Supply 9 volts DC

579.-

Jim Dunlop MXR M102 Dyna Comp Compressor Pedal

The Dyna Comp Compressor can tighten up your signal, add rich sustain, or create the percussive and clicky sound heard on numerous hit records.This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power supplies (not included).Input Impedance 1 MΩOutput Impedance 10 kΩNominal Input Level -5 dBVNominal Output Level -12 dBVNoise Floor* 95 dBVT.H.D 0.2% Typ. at -20 dBV, 1 kHzMax Compression 36 dBAttack Time 5 msRelease Time 1 sBypass True HardwireCurrent Draw 3.3 mAPower Supply 9 volts DC

339.-

Jim Dunlop Slash Octave Fuzz Pedal

Shops offering this product

Related products

Customer reviews from Jim Dunlop Slash Octave Fuzz Pedal

More about Jim Dunlop Slash Octave Fuzz Pedal

Product description

Product information

Product specifications

Explore related categories