Name: Jim Dunlop MXR M196 A/B Box
Brand: JIM DUNLOP
SKU: f2ea7a7f62734634bc4f44c9bea2bf46
Price: 239 AED
Availability: InStock

Jim Dunlop MXR M196 A/B Box

The M196 A/B Box switcher pedal has a single input for any instrument with an audio output that has the ability to feed three separate outputs. The A and B outputs are controlled with individual footswitch buttons and can be on at the same time, sending your signal to different amps. The Throughput jack is great for using with a tuner or sending unaffected signals to an interface for recording purposes.Allows you to deliver your instrument's signal to two separate outputsUse it to select different amps or to use both at the same time with different effectsUse the output to connect a tuner, amplifier or any device that needs to receive the signal always9V battery port2x 1/4" output jacks | 1/4" throughput jack | 1/4" input jack

239.-

Jim Dunlop MXR Bass Compressor Pedal

The Bass Compressor provides recording-quality compression with Constant Headroom Technology and true bypass switching for keeping your low end tight and clean.This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick, Iso-Brick, and Mini Iso-Brick power supplies (not included).Directions:Run a cable from your bass to the Bass Compressor's INPUT jack and run another cable from the Bass Compressor's OUTPUT jack to your amplifier.Set RELEASE, ATTACK, OUTPUT and INPUT controls to 12 o'clock and the RATIO control to 4.Turn the effect on by depressing the footswitch.Observe the METER display while playing normally and set the INPUT knob so that the first 3 to 7 green gain reduction LEDs light, clockwise to light more and counterclockwise to light less LEDs.Rotate the OUTPUT knob clockwise to increase overall effect volume or counterclockwise to decrease it.Rotate the ATTACK knob clockwise to increase reaction time of compression or counterclockwise to de…

699.-

Jim Dunlop MXR Blue Box Octave Guitar Pedal

The Blue Box Octave Fuzz drops your guitar signal two octaves down and combines it with gnarly fuzz for huge subterranean tones.This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick, Iso-Brick, and Mini Iso-Brick power supplies (not included).Directions:Run a cable from your guitar to the Blue Box's INPUT jack and run another cable from the Blue Box's OUTPUT jack to your amplifier.Turn the OUTPUT knob clockwise to BOOST the effect's overall volume.Rotate the OUTPUT knob to increase overall volume of effect or counterclockwise to decrease it.Rotate BLEND knob clockwise to increase amount of sub-octave fuzz or counterclockwise to decrease it.Input Impedance 1 MΩOutput Impedance100 dBVBypass HardwireCurrent DrawEffect On 4 mAEffect Off 1.5 mAPower Supply 9 volts DC0 dBV = 1Vrms

389.-

Jim Dunlop MXR Micro Chorus Guitar Pedal

The Micro Chorus allows you to quickly dial up a stunning range of old-school bucket-brigade chorus sounds with a single Rate control.This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick, Iso-Brick, and Mini Iso-Brick power supplies (not included).Directions:Run a cable from your guitar to the Micro Chorus' INPUT jack and run another cable from the Micro Chorus' OUTPUT jack to your amplifier.Turn the Micro Chorus effect on by depressing the footswitch; the red LED will illuminate, indicating that the effect is activated.Turn the RATE knob clockwise to increase the chorus speed towards a watery shimmer, counterclockwise for a slower rotating sound.Input Impedance 1 MΩOutput Impedance 1 kΩ, 1 kHzMax Input Level -5 dBV, 500HzMax Output Level +8 dBVRate Control 0.25 Hz, 7.5 HzNoise Floor* -89 dBVDelay Time 4.2 ms, 6.8 msFrequency ResponseDelayed Signal 20 Hz to 4.5 kHzDry Signal 20 Hz to 20 kHzBypass True HardwireCurrent Draw 5 mAPower Supply 9 vol…

329.-

Jim Dunlop MXR Bass Chorus Deluxe Pedal

The Bass Chorus Deluxe delivers analog lush modulated tones with Bass and Treble controls, a Flanger switch, and a X-Over switch for tonal flexibility.This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power supplies (not included).Input Impedance 2 MΩOutput ImpedanceTIP (Mono) 600 ΩRING (Stereo) 3.3 KΩMax Input Level* 1 kHz/+10 dBVMax Output Level +13 dBVFrequency Response20 Hz to 20 kHz/±1 dBSignal to Noise Ratio* >96 dBVTone Controls (Delay Signal Only)+8 dB, -11 dB, 100 Hz (BASS)-2 dB, 100 Hz (Center Position BASS)±14 dB, 10 kHz (TREBLE)X-OVER Control+7.5 dB, 20 Hz/+3 dB, 100 Hz (Dry Signal)-18 dB, 20 Hz/-3 dB, 160 Hz (Delay Signal)Rate Control 0.1 Hz to 10 HzMaximum Delay Time 12 msMinimum Delay Time 400 µsDelay Noise Reduction 2:1 ratioBypassMono True HardwireStereo HardwiredCurrent Draw 30 mAPower Supply 9 volts DC

699.-

Jim Dunlop MXR M117R Flanger Guitar Pedal

The MXR Flanger creates a variety of wild sounds from dynamic jet plane or cool space effects to short delay, chorus and vibrato.This pedal can be powered by two 9-volt batteries, a 18-volt adapter or the DC Brick, Iso-Brick and Mini Iso-Brick power supplies.Directions:Run a cable from your guitar to the Flanger's INPUT jack and run another cable from the Flanger's OUTPUT jack to your amplifier.Start with all controls at 12 o'clock.Turn the effect on by depressing the footswitch.Rotate the MANUAL control clockwise to emphasize higher frequencies or counterclockwise to emphasize lower frequencies.Rotate the WIDTH control clockwise to increase the intensity of the time delay as set by the SPEED control or counterclockwise to decrease it.Rotate the SPEED knob clockwise for a faster phase effect or counterclockwise for a slower phase effect.Rotate the REGEN. control clockwise to increase the overall intensity of the effect or counterclockwise to decrease it.Input Impedance 470 kΩOutput Imp…

619.-

Jim Dunlop MXR M102 Dyna Comp Compressor Pedal

The Dyna Comp Compressor can tighten up your signal, add rich sustain, or create the percussive and clicky sound heard on numerous hit records.This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power supplies (not included).Input Impedance 1 MΩOutput Impedance 10 kΩNominal Input Level -5 dBVNominal Output Level -12 dBVNoise Floor* 95 dBVT.H.D 0.2% Typ. at -20 dBV, 1 kHzMax Compression 36 dBAttack Time 5 msRelease Time 1 sBypass True HardwireCurrent Draw 3.3 mAPower Supply 9 volts DC

339.-

Jim Dunlop MXR Timmy Overdrive Pedal

This pedal provides a huge, responsive range of gritty and textured tones that enhance the sound of your rig while preserving its fundamental character-and in an MXR mini housing, this pedal will free up some serious pedalboard space.This pedal can be powered by a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power suppliesInput Impedance 400 kΩOutput Impedance* 1 kΩNoise Floor* -115 dBVGain 3 dBV to 43 dBVBypass True HardwireCurrent Draw 2.2 mAPower Supply 9 volts DC

579.-

Jim Dunlop MXR Distortion III

The Distortion III delivers everything from sweet singing overdrive to massive distortion crunch. This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power supplies (not included). Input Impedance 1 MΩOutput Impedance* 5.5 kΩNominal Intput Level -22 dBVMaximum Output Level +3 dBVNoise Floor** 84 dBVTone Control ±6.5 dB at 3 kHzDistortion Gain 22 dB to 50 dB, 1 kHzBypass True Hardwire Current Draw 3.5 mAPower Supply 9 Volts DC

389.-

Jim Dunlop MXR Script Dyna Comp Compressor

The Script Dyna Comp Compressor combines classic MXR compression with a bypass status LED and AC power jack for modern gigging convenience.This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power supplies (not included).SPECIFICATIONSInput Impedance 470 kΩOutput Impedance 10 kΩMax Input Level -5 dBVNoise Floor* >- 87 dBVCurrent Draw 2.2 mABypass True HardwirePower Supply 9 volts DC*A-weighted, all controls at mid position

299.-

Jim Dunlop MXR M196 A/B Box

Shops offering this product

Related products

Customer reviews from Jim Dunlop MXR M196 A/B Box

More about Jim Dunlop MXR M196 A/B Box

Product description

Product information

Product specifications

Explore related categories