Name: Jim Dunlop MXR Carbon Copy Analog Delay
Brand: JIM DUNLOP
SKU: 655df0f6f30301c42390893dfb0d480d
Price: 569 AED
Availability: InStock

Jim Dunlop MXR Carbon Copy Analog Delay

The Carbon Copy Analog Delay delivers rich, warm bucket-bridgade delay with up to 600ms of delay time and modulation.This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power supplies (not included).Input Impedance 1 MΩOutput Impedance 1 kΩMax Input Level +5 dBV at 500 HzMax Output Level +8 dBVNoise Floor*Mix at Max CW -96 dBVMix at Max CCW -104 dBVDelay Distortion

569.-

Jim Dunlop MXR Carbon Copy Deluxe Analog

The Carbon Copy Deluxe Analog Delay features extended delay time with tap tempo functionality, optional modulation, a switch to toggle between the warm sound of the original pedal and vibrant sound of the Bright version, and much more.This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power supplies (not included).Input Impedance 1MΩOutput Impedance 1 kΩMaximum Output Level +8dBVNoise Floor* -96 dBVDelay Time 40ms to 1200msNoise Reduction 2:1 ratioModulation Speed 0.1 Hz to 10 HzTap Divisions Dotted 8th, 8th, Triplet, 16thBright** 1.5 kHz, +4.5 dB200 Hz, -3 dBBypass True HardwireCurrent Draw 22 mA***44 mA****Power Supply DC 9 volts

869.-

Jim Dunlop MXR Bass Chorus Deluxe Pedal

The Bass Chorus Deluxe delivers analog lush modulated tones with Bass and Treble controls, a Flanger switch, and a X-Over switch for tonal flexibility.This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power supplies (not included).Input Impedance 2 MΩOutput ImpedanceTIP (Mono) 600 ΩRING (Stereo) 3.3 KΩMax Input Level* 1 kHz/+10 dBVMax Output Level +13 dBVFrequency Response20 Hz to 20 kHz/±1 dBSignal to Noise Ratio* >96 dBVTone Controls (Delay Signal Only)+8 dB, -11 dB, 100 Hz (BASS)-2 dB, 100 Hz (Center Position BASS)±14 dB, 10 kHz (TREBLE)X-OVER Control+7.5 dB, 20 Hz/+3 dB, 100 Hz (Dry Signal)-18 dB, 20 Hz/-3 dB, 160 Hz (Delay Signal)Rate Control 0.1 Hz to 10 HzMaximum Delay Time 12 msMinimum Delay Time 400 µsDelay Noise Reduction 2:1 ratioBypassMono True HardwireStereo HardwiredCurrent Draw 30 mAPower Supply 9 volts DC

699.-

Jim Dunlop MXR Script Dyna Comp Compressor

The Script Dyna Comp Compressor combines classic MXR compression with a bypass status LED and AC power jack for modern gigging convenience.This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power supplies (not included).SPECIFICATIONSInput Impedance 470 kΩOutput Impedance 10 kΩMax Input Level -5 dBVNoise Floor* >- 87 dBVCurrent Draw 2.2 mABypass True HardwirePower Supply 9 volts DC*A-weighted, all controls at mid position

299.-

Jim Dunlop MXR M102 Dyna Comp Compressor Pedal

The Dyna Comp Compressor can tighten up your signal, add rich sustain, or create the percussive and clicky sound heard on numerous hit records.This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power supplies (not included).Input Impedance 1 MΩOutput Impedance 10 kΩNominal Input Level -5 dBVNominal Output Level -12 dBVNoise Floor* 95 dBVT.H.D 0.2% Typ. at -20 dBV, 1 kHzMax Compression 36 dBAttack Time 5 msRelease Time 1 sBypass True HardwireCurrent Draw 3.3 mAPower Supply 9 volts DC

339.-

Jim Dunlop MXR DYNA COMP DELUXE

The Dyna Comp Deluxe Compressor delivers the classic sound of the original with a Clean control, Tone control, and an Attack switch tailor it to your specific rig and playing needs.This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power supplies (not included).Input Impedance 600 kΩOutput Impedance 25 kΩMax Input Level -5 dBVMax Output Level +2 dBVMax Compression 36 dBTHD* 0.2%Noise Floor** -100 dBVCurrent Draw 11 maPower Supply 9 VDC

499.-

Jim Dunlop MXR Bass Distortion Pedal

The Bass D.I.+ features a D.I., separate clean and distortion channels, an array of controls to fine-tune your sound, and a noise gate trigger control to eliminate hum and hiss.This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power supplies (not included).Input Impedance 2.2 MΩOutput ImpedanceUnbalanced 150 ΩBalanced 300 ΩBypass Freq. Response+0/-0.5 dB, 20 Hz to 20 kHzTone ControlsBass ±18 dB, 60 HzMid ±10 dB, 850 HzTreble ±12 dB, 4 kHzNoise Floor*Bypass -102 dBVClean Effect -98 dBVDistortion Effect, Gate Off -94 dBVDistortion Effect, Gate On -98 dBVVolume Control Range 40 dBGate Trigger Range 28 dBSensitivity -66 dBV at 1 kHzBypass BufferedCurrent Draw 9 mAPower Supply 9 volts DC

699.-

Jim Dunlop MXR M117R Flanger Guitar Pedal

The MXR Flanger creates a variety of wild sounds from dynamic jet plane or cool space effects to short delay, chorus and vibrato.This pedal can be powered by two 9-volt batteries, a 18-volt adapter or the DC Brick, Iso-Brick and Mini Iso-Brick power supplies.Directions:Run a cable from your guitar to the Flanger's INPUT jack and run another cable from the Flanger's OUTPUT jack to your amplifier.Start with all controls at 12 o'clock.Turn the effect on by depressing the footswitch.Rotate the MANUAL control clockwise to emphasize higher frequencies or counterclockwise to emphasize lower frequencies.Rotate the WIDTH control clockwise to increase the intensity of the time delay as set by the SPEED control or counterclockwise to decrease it.Rotate the SPEED knob clockwise for a faster phase effect or counterclockwise for a slower phase effect.Rotate the REGEN. control clockwise to increase the overall intensity of the effect or counterclockwise to decrease it.Input Impedance 470 kΩOutput Imp…

619.-

Jim Dunlop MXR Micro Chorus Guitar Pedal

The Micro Chorus allows you to quickly dial up a stunning range of old-school bucket-brigade chorus sounds with a single Rate control.This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick, Iso-Brick, and Mini Iso-Brick power supplies (not included).Directions:Run a cable from your guitar to the Micro Chorus' INPUT jack and run another cable from the Micro Chorus' OUTPUT jack to your amplifier.Turn the Micro Chorus effect on by depressing the footswitch; the red LED will illuminate, indicating that the effect is activated.Turn the RATE knob clockwise to increase the chorus speed towards a watery shimmer, counterclockwise for a slower rotating sound.Input Impedance 1 MΩOutput Impedance 1 kΩ, 1 kHzMax Input Level -5 dBV, 500HzMax Output Level +8 dBVRate Control 0.25 Hz, 7.5 HzNoise Floor* -89 dBVDelay Time 4.2 ms, 6.8 msFrequency ResponseDelayed Signal 20 Hz to 4.5 kHzDry Signal 20 Hz to 20 kHzBypass True HardwireCurrent Draw 5 mAPower Supply 9 vol…

329.-

Jim Dunlop MXR Timmy Overdrive Pedal

This pedal provides a huge, responsive range of gritty and textured tones that enhance the sound of your rig while preserving its fundamental character-and in an MXR mini housing, this pedal will free up some serious pedalboard space.This pedal can be powered by a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power suppliesInput Impedance 400 kΩOutput Impedance* 1 kΩNoise Floor* -115 dBVGain 3 dBV to 43 dBVBypass True HardwireCurrent Draw 2.2 mAPower Supply 9 volts DC

579.-

Jim Dunlop MXR Carbon Copy Analog Delay

Shops offering this product

Related products

More about Jim Dunlop MXR Carbon Copy Analog Delay

Product description

Product information

Product specifications

Explore related categories