Name: Jim Dunlop Mesh Steel Gray Strap
Brand: JIM DUNLOP
SKU: 68a3cde80b8507cfb975be55178b2b1e
Price: 109 AED
Availability: InStock

Jim Dunlop Mesh Steel Gray Strap

Dunlop Mesh Straps are made from soft, comfortable fabric in rich, dark colors.

109.-

Jim Dunlop Strap Grommet Black

69.-

Jim Dunlop MXR Carbon Copy Analog Delay

The Carbon Copy Analog Delay delivers rich, warm bucket-bridgade delay with up to 600ms of delay time and modulation.This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power supplies (not included).Input Impedance 1 MΩOutput Impedance 1 kΩMax Input Level +5 dBV at 500 HzMax Output Level +8 dBVNoise Floor*Mix at Max CW -96 dBVMix at Max CCW -104 dBVDelay Distortion

569.-

Jim Dunlop Slash Octave Fuzz Pedal

The Slash Octave Fuzz combines searing fuzz with a sub octave grow and an array of controls for fine-tuning your sinister sound.This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power supplies (not included).Input Impedance 47 kΩOutput Impedance 100 ΩSignal to Noise* >85 dBDry Max Gain +1.6 dBFuzz Gain Range 40 dBOctave Up Gain Range 20 dBSub Octave Corner Freq. 149 HzBypass True HardwireCurrent Draw 17 mAPower Requirement 9 volts DC

579.-

Jim Dunlop MXR Timmy Overdrive Pedal

This pedal provides a huge, responsive range of gritty and textured tones that enhance the sound of your rig while preserving its fundamental character-and in an MXR mini housing, this pedal will free up some serious pedalboard space.This pedal can be powered by a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power suppliesInput Impedance 400 kΩOutput Impedance* 1 kΩNoise Floor* -115 dBVGain 3 dBV to 43 dBVBypass True HardwireCurrent Draw 2.2 mAPower Supply 9 volts DC

579.-

Jim Dunlop MXR Bass Distortion Pedal

The Bass D.I.+ features a D.I., separate clean and distortion channels, an array of controls to fine-tune your sound, and a noise gate trigger control to eliminate hum and hiss.This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power supplies (not included).Input Impedance 2.2 MΩOutput ImpedanceUnbalanced 150 ΩBalanced 300 ΩBypass Freq. Response+0/-0.5 dB, 20 Hz to 20 kHzTone ControlsBass ±18 dB, 60 HzMid ±10 dB, 850 HzTreble ±12 dB, 4 kHzNoise Floor*Bypass -102 dBVClean Effect -98 dBVDistortion Effect, Gate Off -94 dBVDistortion Effect, Gate On -98 dBVVolume Control Range 40 dBGate Trigger Range 28 dBSensitivity -66 dBV at 1 kHzBypass BufferedCurrent Draw 9 mAPower Supply 9 volts DC

699.-

Jim Dunlop MXR Script Dyna Comp Compressor

The Script Dyna Comp Compressor combines classic MXR compression with a bypass status LED and AC power jack for modern gigging convenience.This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power supplies (not included).SPECIFICATIONSInput Impedance 470 kΩOutput Impedance 10 kΩMax Input Level -5 dBVNoise Floor* >- 87 dBVCurrent Draw 2.2 mABypass True HardwirePower Supply 9 volts DC*A-weighted, all controls at mid position

299.-

Jim Dunlop MXR Bass Compressor Pedal

The Bass Compressor provides recording-quality compression with Constant Headroom Technology and true bypass switching for keeping your low end tight and clean.This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick, Iso-Brick, and Mini Iso-Brick power supplies (not included).Directions:Run a cable from your bass to the Bass Compressor's INPUT jack and run another cable from the Bass Compressor's OUTPUT jack to your amplifier.Set RELEASE, ATTACK, OUTPUT and INPUT controls to 12 o'clock and the RATIO control to 4.Turn the effect on by depressing the footswitch.Observe the METER display while playing normally and set the INPUT knob so that the first 3 to 7 green gain reduction LEDs light, clockwise to light more and counterclockwise to light less LEDs.Rotate the OUTPUT knob clockwise to increase overall effect volume or counterclockwise to decrease it.Rotate the ATTACK knob clockwise to increase reaction time of compression or counterclockwise to de…

699.-

Jim Dunlop BMF Suede Straps - Black

BMF Suede Straps bring to mind old-world craftsmanship and quality. They're comfortable, lightweight, and guaranteed to last for years to come.

159.-

Jim Dunlop MXR M102 Dyna Comp Compressor Pedal

The Dyna Comp Compressor can tighten up your signal, add rich sustain, or create the percussive and clicky sound heard on numerous hit records.This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power supplies (not included).Input Impedance 1 MΩOutput Impedance 10 kΩNominal Input Level -5 dBVNominal Output Level -12 dBVNoise Floor* 95 dBVT.H.D 0.2% Typ. at -20 dBV, 1 kHzMax Compression 36 dBAttack Time 5 msRelease Time 1 sBypass True HardwireCurrent Draw 3.3 mAPower Supply 9 volts DC

339.-

Jim Dunlop Mesh Steel Gray Strap

Shops offering this product

Related products

Customer reviews from Jim Dunlop Mesh Steel Gray Strap

More about Jim Dunlop Mesh Steel Gray Strap

Product description

Product information

Product specifications

Explore related categories