Name: Jim Dunlop DSP500K Super Pot 500K Split Shaft Potentiometer
Brand: JIM DUNLOP
SKU: 4c6ebd6bd51c4266279a126c76f3c218
Price: 59 AED
Availability: InStock

Jim Dunlop DSP500K Super Pot 500K Split Shaft Potentiometer

Dunlop's Super Pot Potentiometers are high-performance volume/tone pots that are made to last a lifetime. Resistant to dust and corrosion, they provide a smooth audio-style taper that will never sound noisy or scratchy. They've been tested at over 7 million turns-after that, we stopped counting. Put a set of these pots in your instrument, and they just may be the last you ever buy.Dunlop Electronic Parts are offered for sale with the qualified technician in mind. If you do not have experience installing electronic parts, please have your installation or repair performed by a qualified technician.

59.-

Jim Dunlop Mesh Steel Gray Strap

Dunlop Mesh Straps are made from soft, comfortable fabric in rich, dark colors.

109.-

Jim Dunlop Slash Octave Fuzz Pedal

The Slash Octave Fuzz combines searing fuzz with a sub octave grow and an array of controls for fine-tuning your sinister sound.This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power supplies (not included).Input Impedance 47 kΩOutput Impedance 100 ΩSignal to Noise* >85 dBDry Max Gain +1.6 dBFuzz Gain Range 40 dBOctave Up Gain Range 20 dBSub Octave Corner Freq. 149 HzBypass True HardwireCurrent Draw 17 mAPower Requirement 9 volts DC

579.-

Jim Dunlop MXR Timmy Overdrive Pedal

This pedal provides a huge, responsive range of gritty and textured tones that enhance the sound of your rig while preserving its fundamental character-and in an MXR mini housing, this pedal will free up some serious pedalboard space.This pedal can be powered by a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power suppliesInput Impedance 400 kΩOutput Impedance* 1 kΩNoise Floor* -115 dBVGain 3 dBV to 43 dBVBypass True HardwireCurrent Draw 2.2 mAPower Supply 9 volts DC

579.-

Jim Dunlop MXR Bass Distortion Pedal

The Bass D.I.+ features a D.I., separate clean and distortion channels, an array of controls to fine-tune your sound, and a noise gate trigger control to eliminate hum and hiss.This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power supplies (not included).Input Impedance 2.2 MΩOutput ImpedanceUnbalanced 150 ΩBalanced 300 ΩBypass Freq. Response+0/-0.5 dB, 20 Hz to 20 kHzTone ControlsBass ±18 dB, 60 HzMid ±10 dB, 850 HzTreble ±12 dB, 4 kHzNoise Floor*Bypass -102 dBVClean Effect -98 dBVDistortion Effect, Gate Off -94 dBVDistortion Effect, Gate On -98 dBVVolume Control Range 40 dBGate Trigger Range 28 dBSensitivity -66 dBV at 1 kHzBypass BufferedCurrent Draw 9 mAPower Supply 9 volts DC

699.-

Jim Dunlop MXR Bass Compressor Pedal

The Bass Compressor provides recording-quality compression with Constant Headroom Technology and true bypass switching for keeping your low end tight and clean.This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick, Iso-Brick, and Mini Iso-Brick power supplies (not included).Directions:Run a cable from your bass to the Bass Compressor's INPUT jack and run another cable from the Bass Compressor's OUTPUT jack to your amplifier.Set RELEASE, ATTACK, OUTPUT and INPUT controls to 12 o'clock and the RATIO control to 4.Turn the effect on by depressing the footswitch.Observe the METER display while playing normally and set the INPUT knob so that the first 3 to 7 green gain reduction LEDs light, clockwise to light more and counterclockwise to light less LEDs.Rotate the OUTPUT knob clockwise to increase overall effect volume or counterclockwise to decrease it.Rotate the ATTACK knob clockwise to increase reaction time of compression or counterclockwise to de…

699.-

Jim Dunlop MXR Distortion III

The Distortion III delivers everything from sweet singing overdrive to massive distortion crunch. This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power supplies (not included). Input Impedance 1 MΩOutput Impedance* 5.5 kΩNominal Intput Level -22 dBVMaximum Output Level +3 dBVNoise Floor** 84 dBVTone Control ±6.5 dB at 3 kHzDistortion Gain 22 dB to 50 dB, 1 kHzBypass True Hardwire Current Draw 3.5 mAPower Supply 9 Volts DC

389.-

Jim Dunlop Micro Amp Pedal

The Micro Amp allows you to boost your signal with a preset amount of gain up to +26dB.This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick, Iso-Brick, and Mini Iso-Brick power supplies (not included).Directions:Run a cable from your guitar to the Micro Amp's INPUT jack and run another cable from the Micro Amp's OUTPUT jack to your amplifier.Start with the control at 12 o'clock.Turn the effect on by depressing the footswitch.Rotate the GAIN knob clockwise to increase amount of signal boost or counterclockwise to decrease it.Input Impedance 1 MΩOutput Impedance 470 ΩMaximum Output Level +6 dBVNoise Floor* -80 dBVGain Control +0.5 dB to +26 dBFreq. Response 20 Hz to 20 kHz,+0 dB, -1.4 dBBypass HardwireCurrent Draw 2.5 mAPower Supply 9 volts DC

329.-

Jim Dunlop Pedal Mxr Bass Overdrive

The Bass Overdrive delivers burly overdriven tones with a Clean control to blend in a pre-set EQ clean signal.This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power supplies (not included).Input Impedance 1 MΩOutput Impedance95 dBCurrent Draw 19 mAPower Supply 9 volts DC

519.-

Jim Dunlop Pedal Mxr Bass Overdrive

519.-

Jim Dunlop DSP500K Super Pot 500K Split Shaft Potentiometer

Shops offering this product

Related products

More about Jim Dunlop DSP500K Super Pot 500K Split Shaft Potentiometer

Product description

Product information

Product specifications

Explore related categories