Name: Jim Dunlop Bridge Pin Black - Sell Per Pin
Brand: JIM DUNLOP
SKU: 0d16d2fccc0354bdbd4ff02a4d896876
Price: 5 AED
Availability: OutOfStock

Jim Dunlop Bridge Pin White - Sell Per Pin

5.-

Jim Dunlop Micro Amp Pedal

The Micro Amp allows you to boost your signal with a preset amount of gain up to +26dB.This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick, Iso-Brick, and Mini Iso-Brick power supplies (not included).Directions:Run a cable from your guitar to the Micro Amp's INPUT jack and run another cable from the Micro Amp's OUTPUT jack to your amplifier.Start with the control at 12 o'clock.Turn the effect on by depressing the footswitch.Rotate the GAIN knob clockwise to increase amount of signal boost or counterclockwise to decrease it.Input Impedance 1 MΩOutput Impedance 470 ΩMaximum Output Level +6 dBVNoise Floor* -80 dBVGain Control +0.5 dB to +26 dBFreq. Response 20 Hz to 20 kHz,+0 dB, -1.4 dBBypass HardwireCurrent Draw 2.5 mAPower Supply 9 volts DC

329.-

Jim Dunlop Pedal Mxr Bass Overdrive

The Bass Overdrive delivers burly overdriven tones with a Clean control to blend in a pre-set EQ clean signal.This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power supplies (not included).Input Impedance 1 MΩOutput Impedance95 dBCurrent Draw 19 mAPower Supply 9 volts DC

519.-

Jim Dunlop MXR Bass Chorus Deluxe Pedal

The Bass Chorus Deluxe delivers analog lush modulated tones with Bass and Treble controls, a Flanger switch, and a X-Over switch for tonal flexibility.This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power supplies (not included).Input Impedance 2 MΩOutput ImpedanceTIP (Mono) 600 ΩRING (Stereo) 3.3 KΩMax Input Level* 1 kHz/+10 dBVMax Output Level +13 dBVFrequency Response20 Hz to 20 kHz/±1 dBSignal to Noise Ratio* >96 dBVTone Controls (Delay Signal Only)+8 dB, -11 dB, 100 Hz (BASS)-2 dB, 100 Hz (Center Position BASS)±14 dB, 10 kHz (TREBLE)X-OVER Control+7.5 dB, 20 Hz/+3 dB, 100 Hz (Dry Signal)-18 dB, 20 Hz/-3 dB, 160 Hz (Delay Signal)Rate Control 0.1 Hz to 10 HzMaximum Delay Time 12 msMinimum Delay Time 400 µsDelay Noise Reduction 2:1 ratioBypassMono True HardwireStereo HardwiredCurrent Draw 30 mAPower Supply 9 volts DC

699.-

Jim Dunlop Germanium Fuzz Face Mini Distortion

This Fuzz Face Mini Distortion provides warm vintage fuzz tones thanks to mismatched germanium transistors, with a status LED, AC power jack, battery door, and mini housing for modern convenience.This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power supplies (not included).Input Impedance 10 kΩOutput ImpedanceMax Volume 2 kΩ-6 dB Volume 115 kΩMax Gain 45 dBBypass True HardwireCurrent Draw 3.4 mAPower Supply 9 volts DC

499.-

Jim Dunlop Silicon Fuzz Face Mini Distortion

This Fuzz Face Mini Distortion sounds bright and aggressive thanks to vintage spec silicon transistors, with a status LED, AC power jack, battery door, and mini housing for modern convenience.This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power supplies (not included).Input Impedance 10 kΩOutput ImpedanceMax Volume

499.-

Jim Dunlop MXR Carbon Copy Deluxe Analog

The Carbon Copy Deluxe Analog Delay features extended delay time with tap tempo functionality, optional modulation, a switch to toggle between the warm sound of the original pedal and vibrant sound of the Bright version, and much more.This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power supplies (not included).Input Impedance 1MΩOutput Impedance 1 kΩMaximum Output Level +8dBVNoise Floor* -96 dBVDelay Time 40ms to 1200msNoise Reduction 2:1 ratioModulation Speed 0.1 Hz to 10 HzTap Divisions Dotted 8th, 8th, Triplet, 16thBright** 1.5 kHz, +4.5 dB200 Hz, -3 dBBypass True HardwireCurrent Draw 22 mA***44 mA****Power Supply DC 9 volts

869.-

Jim Dunlop MXR Micro Chorus Guitar Pedal

The Micro Chorus allows you to quickly dial up a stunning range of old-school bucket-brigade chorus sounds with a single Rate control.This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick, Iso-Brick, and Mini Iso-Brick power supplies (not included).Directions:Run a cable from your guitar to the Micro Chorus' INPUT jack and run another cable from the Micro Chorus' OUTPUT jack to your amplifier.Turn the Micro Chorus effect on by depressing the footswitch; the red LED will illuminate, indicating that the effect is activated.Turn the RATE knob clockwise to increase the chorus speed towards a watery shimmer, counterclockwise for a slower rotating sound.Input Impedance 1 MΩOutput Impedance 1 kΩ, 1 kHzMax Input Level -5 dBV, 500HzMax Output Level +8 dBVRate Control 0.25 Hz, 7.5 HzNoise Floor* -89 dBVDelay Time 4.2 ms, 6.8 msFrequency ResponseDelayed Signal 20 Hz to 4.5 kHzDry Signal 20 Hz to 20 kHzBypass True HardwireCurrent Draw 5 mAPower Supply 9 vol…

329.-

Jim Dunlop MXR CSP101SL Script Phase 90 Pedal

The Script Phase 90 combines vintage phasing with an LED and AC power jack for modern convenience.This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power supplies (not included).SPECIFICATIONSInput Impedance 470 kΩOutput Impedance 10 kΩMax Input Level -5 dBVNoise Floor* >95 dBCurrent Draw 8.2 mABypass True HardwirePower Supply 9 volts DC

419.-

Jim Dunlop MXR Blue Box Octave Guitar Pedal

The Blue Box Octave Fuzz drops your guitar signal two octaves down and combines it with gnarly fuzz for huge subterranean tones.This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick, Iso-Brick, and Mini Iso-Brick power supplies (not included).Directions:Run a cable from your guitar to the Blue Box's INPUT jack and run another cable from the Blue Box's OUTPUT jack to your amplifier.Turn the OUTPUT knob clockwise to BOOST the effect's overall volume.Rotate the OUTPUT knob to increase overall volume of effect or counterclockwise to decrease it.Rotate BLEND knob clockwise to increase amount of sub-octave fuzz or counterclockwise to decrease it.Input Impedance 1 MΩOutput Impedance100 dBVBypass HardwireCurrent DrawEffect On 4 mAEffect Off 1.5 mAPower Supply 9 volts DC0 dBV = 1Vrms

389.-

Jim Dunlop Bridge Pin Black - Sell Per Pin

Shops offering this product

Related products

Customer reviews from Jim Dunlop Bridge Pin Black - Sell Per Pin

More about Jim Dunlop Bridge Pin Black - Sell Per Pin

Product description

Product specifications