Name: Behringer Eurorack Pro RX1202FX Rackmount Mixer with Effects
Brand: BEHRINGER
SKU: a2868c62c30193ee3819db656c65f9b3
Price: 769 AED
Availability: InStock

Behringer Studio L High-end Studio Control with VCA Control and USB Audio Interface

Midas Mic Preamp - Legend Inside!Did you know that Midas is one of the most recognized brands used by audio professionals around the world? Now you can get the gear the pros use! STUDIO L comes with two state-of-the-art Midas microphone preamplifiers with +48 V phantom power, ultra-low noise, high gain and audiophile quality.The STUDIO L is the ideal solution for home or professional studios, or as part of a larger setup. Premium, ultra-low noise components and high headroom lets your music shine at its best - this is especially true for one of the most critical sources: Vocals!InputsInputs4Preamps2 x Midas designedType2 x XLR / TRS combo connector (mic/line)ImpedanceMic: 3 kΩ / Line: 1 MΩLine inputs2 x 1/4" TRS, balanced or unbalanced, +4/-10 dB1 x 1/8" TRS stereo (input 3/4)Maximum input level+22 dBuOutputsOutputs3 stereoLine outputs6 x 1/4" TRS, balanced or unbalancedHeadphone outputs2 x 1/4" TRS stereoMaximum output level+22 dBuUSBTypeClass compliant USB 2.0, type BSupported operat…

809.-

Behringer STUDIO M Premium Passive Studio Controller

STUDIO MThe STUDIO M Premium Passive Studio Controller takes controlling your setup to the next level. Instantly switch between any two audio sources and monitors and adjust their level. The large volume knob makes it easy to dial-in the perfect level every time, without having to reach for your mixer - or your mouse! With two pairs of input and output connectors as well as a 3.5 mm (1/8”) stereo input, the STUDIO M is ultra-easy to connect to your current system - and so affordable.InputsLine inputs2 stereoType4 x 1/4" TRS, balanced or unbalancedAlternative input B1 x 1/8" TRS, stereoOutputsLine outputs2 stereoType4 x 1/4" TRS, balanced or unbalancedControlsVolume0 - 100%Playback controlsMono, Mute, DimMonitor selectA, BSource selectA, BSystemFrequency response20 Hz to 20 kHz (±0.5 dB)Signal-to-noise ratio

269.-

TC-Helicon VoiceTone X1 Megaphone and Distortion Vocal Effects

VOICETONE X1 brings a modern “down 'n' dirty” quality to live vocals with crackling megaphones and amplified vocal distortion effects. Punctuate a word, phrase or an entire song with these sounds.The Drive and Filter controls can be set to suit your voice and the song. Kick it on, kick it off - you're in control!Plug in your mic, plug your pedal into the mixer & set the gain Turn on the effect Of course, you can always change the style or the amount of correction, but you shouldn't need the manual - unless you're making a fire!You can chain VOICETONE X1 to all of the other VOICETONE singles, mixing and matching effects to define your personal sound. It also works with DITTO MIC LOOPER, the pure looping pedal for singers and instrumentalists.Use the Singles Connect Kit (available separately) to mix and match up to 4 TC HELICON vocal effect pedals together conveniently, simply - and with less cable clutter than ever before.Analog InputsConnectors, balanced: Mic.: XLRMic Input Level @ 0 d…

449.-

TC-Helicon Voice Tone D1 - Doubling and De-Tune

The overdubbing of unison vocals is a classic studio technique to create a fuller sound. Now, you can take this technology to the stage with distinct styles you can mix to perfectly suit your song.VOICETONE D1 thickens your live sound with realistic doubling emulations, octaves and detune effects in one easy-to-use pedal. Plug in your mic, plug your pedal into the mixer & set the gain Turn on the effectOf course, you can always change the style or the amount of correction, but you shouldn't need the manual - unless you'remaking a fire! You can chain VOICETONE D1 to all of the other VOICETONE singles, mixing and matching effects to define your personal sound.It also works with DITTO MIC LOOPER, the pure looping pedal for singers and instrumentalists. Use the Singles Connect Kit (available separately) to mix and matchup to 4 TC HELICON vocal effect pedals together conveniently, simply - and with less cable clutter than ever before.Analog InputsConnectors, balanced: Mic.: XLRMic Input Lev…

459.-

Jim Dunlop MXR Bass Distortion Pedal

The Bass D.I.+ features a D.I., separate clean and distortion channels, an array of controls to fine-tune your sound, and a noise gate trigger control to eliminate hum and hiss.This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power supplies (not included).Input Impedance 2.2 MΩOutput ImpedanceUnbalanced 150 ΩBalanced 300 ΩBypass Freq. Response+0/-0.5 dB, 20 Hz to 20 kHzTone ControlsBass ±18 dB, 60 HzMid ±10 dB, 850 HzTreble ±12 dB, 4 kHzNoise Floor*Bypass -102 dBVClean Effect -98 dBVDistortion Effect, Gate Off -94 dBVDistortion Effect, Gate On -98 dBVVolume Control Range 40 dBGate Trigger Range 28 dBSensitivity -66 dBV at 1 kHzBypass BufferedCurrent Draw 9 mAPower Supply 9 volts DC

699.-

Jim Dunlop Joe Bonamassa Fuzz Face Mini Pedal

This Fuzz Face Mini Distortion features the same thick, creamy fuzz tones as the JBF3B in a smaller housing, with a status LED, AC power jack, and battery door for modern convenience.This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick, Iso-Brick, and Mini Iso-Brick power supplies (not included).Directions:Run a cable from your guitar to the FFM4's INPUT jack and another cable from the FFM4's OUTPUT jack to your amplifier.Start with both controls at 12 o'clock.Turn the effect on by depressing the footswitch.Rotate the VOLUME knob clockwise to increase overall effect volume or counterclockwise to decrease it.Rotate the FUZZ knob clockwise to increase amount of fuzz or counterclockwise to decrease it.Input Impedance 10 kΩOutput ImpedanceMax Volume 16 kΩ-6 dB Volume* 126 kΩMax Gain 45 dBBypass True HardwireCurrent Draw 2 mAPower Supply 9 volts DC

479.-

Jim Dunlop Germanium Fuzz Face Mini Distortion

This Fuzz Face Mini Distortion provides warm vintage fuzz tones thanks to mismatched germanium transistors, with a status LED, AC power jack, battery door, and mini housing for modern convenience.This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power supplies (not included).Input Impedance 10 kΩOutput ImpedanceMax Volume 2 kΩ-6 dB Volume 115 kΩMax Gain 45 dBBypass True HardwireCurrent Draw 3.4 mAPower Supply 9 volts DC

499.-

Jim Dunlop MXR M294 Sugar Drive Overdrive Pedal

Based on a rare and elusive circuit, the MXR Sugar Drive Pedal provides a diverse range of clear and transparent overdrive tones, from sauced up boosting to blown-tube distortion.This pedal can be powered by a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power supplies (not included).Input Impedance 600 kΩOutput Impedance 3 kΩNominal Input Level +6 dBVMaximum Output LevelTrue Bypass without Buffer selected+26 dBVTone control (@ full CCW): -20 dB @ 3 kHzCurrent Draw 18.5 mA @ 9 VDCPower Requirements 9 VDC (ECB003 AC adapter)Throughput Gain up to +50 dB @ 1kHz

469.-

Jim Dunlop MXR M117R Flanger Guitar Pedal

The MXR Flanger creates a variety of wild sounds from dynamic jet plane or cool space effects to short delay, chorus and vibrato.This pedal can be powered by two 9-volt batteries, a 18-volt adapter or the DC Brick, Iso-Brick and Mini Iso-Brick power supplies.Directions:Run a cable from your guitar to the Flanger's INPUT jack and run another cable from the Flanger's OUTPUT jack to your amplifier.Start with all controls at 12 o'clock.Turn the effect on by depressing the footswitch.Rotate the MANUAL control clockwise to emphasize higher frequencies or counterclockwise to emphasize lower frequencies.Rotate the WIDTH control clockwise to increase the intensity of the time delay as set by the SPEED control or counterclockwise to decrease it.Rotate the SPEED knob clockwise for a faster phase effect or counterclockwise for a slower phase effect.Rotate the REGEN. control clockwise to increase the overall intensity of the effect or counterclockwise to decrease it.Input Impedance 470 kΩOutput Imp…

619.-

Jim Dunlop Micro Amp Pedal

The Micro Amp allows you to boost your signal with a preset amount of gain up to +26dB.This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick, Iso-Brick, and Mini Iso-Brick power supplies (not included).Directions:Run a cable from your guitar to the Micro Amp's INPUT jack and run another cable from the Micro Amp's OUTPUT jack to your amplifier.Start with the control at 12 o'clock.Turn the effect on by depressing the footswitch.Rotate the GAIN knob clockwise to increase amount of signal boost or counterclockwise to decrease it.Input Impedance 1 MΩOutput Impedance 470 ΩMaximum Output Level +6 dBVNoise Floor* -80 dBVGain Control +0.5 dB to +26 dBFreq. Response 20 Hz to 20 kHz,+0 dB, -1.4 dBBypass HardwireCurrent Draw 2.5 mAPower Supply 9 volts DC

329.-

Behringer Eurorack Pro RX1202FX Rackmount Mixer with Effects

Shops offering this product

Related products

Customer reviews from Behringer Eurorack Pro RX1202FX Rackmount Mixer with Effects

More about Behringer Eurorack Pro RX1202FX Rackmount Mixer with Effects

Product description

Product specifications

Explore related categories