Cable Clamps

Cable clamps are seemingly insignificant things that are very useful in the wiring. They make it very convenient to run the wires along walls, furniture, or around other fittings and fixtures. These clamps are useful in both domestic and commercial environments.

An electrical wiring system consists of countless big and small elements. Some of them are active, and most others are passive or supporting elements of the system. Cable clamps, among these, is a passive element. They are helpful for securing cables and wiring to fixed points. Basically, it is a cable mounting and management tool. However, they help make your home or office look much cleaner than they would be with trailing loose wires. Read this article to find out more about them. Having a better understanding of it will help you choose the right type of clips and clamps while shopping.

Different types of cable clamps

One of the most significant aspects of electrical wiring is safety. The wiring should not just do the job, but it should be safe for people and machines as well. However, not all of them are equal or have the same functions. Some of them are designed for light wiring while there are others that are suitable for heavy-duty industrial wiring. In order to be able to choose the right type of clamp, you should know the basic differences between each type of them. Here is a list of the four most popular types of cable clamps.

Self-adhesive cable clips

This is the type of clip that most new DIYers prefer. As they do not need nailing or pinning in place, self-adhesive cable clips are easy to install, and the chances of making any mistakes are less. You can peel off the backing layer to expose a sticky surface so that you can fix it on any surface in a matter of seconds. However, not all wires are of the same size or weight. Wires with large gauge require a bigger clamp, and also heavier wires require more adhesive so that the clamp can support its weight. Therefore, there are self-adhesive cable clips of different sizes and weight-bearing capacities.

Nail cable clips

Nail cable clips are similar to self-adhesive clips in many ways. Similar to adhesive clips, nail cable clips also have plastic external housing. But the difference is that there is an actual nail that lets you fix the clip to the wall or any other surface instead of an adhesive surface. The benefit of this method is that nail clips can hold much more weight than adhesive clips. Because of this, nail-in clips are very widely used. People use them for organising ethernet cables and TV cables to run wires outside the house. These too are available in lots of sizes, shapes and materials.

Screw-in cable clips

These are proper wire clamps that people use for permanent installations. These are hard-wearing and are capable of securing heavier, thicker wiring and tubing. Moreover, this type of clips will give you a better overall finish as well. Some of the most common use cases include installation of PMA ducts, cabling in high-pressure washdown duct in the food & beverage industries. Screw cable clips have many advantages, such as improved pressure relief for locking nuts and bushes. This allows you to terminate a conduit at a panel.

Metal cable clips

If you want to do some heavy-duty wiring or tubing, then you have to be using metal clips. This clip is specifically designed for industrial use and therefore can be a little impractical for small works around the house. Metal cable clips are resistant chemicals and other environmental factors. Also, you can adapt them to any size and number of cables. These are especially useful in the construction of escape routes that should be durable enough to resist early collapse during fires, as well as outdoors where the cable and the clamps will be exposed to UV light.