Brake fluid helps to meet specific quality standards for the braking system to work correctly. Although replacing these fluids is done once a year, knowing the characteristics is a must for an automobile owner. Further readings will let you be familiar with the brake fluids, their purchase, and a few queries as well. So, read on.

What if you push the brake and your vehicle doesn’t stop? The brake’s functionality is directly proportional to the safety of commuters and other entities around. And fluid inside is an integral part of the braking system, consisting of master and slave cylinders. Whenever you apply the brake, the master cylinder pushes the piston causing the liquid to flow through the slave cylinders at each wheel. And therefore, the pistons at slave cylinders cause the vehicle to stop. Front vehicles play a significant role in the braking mechanism because the force throws the car’s weight forward. For that, different types of brakes experts mount on the front and rear ends. The component of fluid is the same that spreads evenly throughout the system. Here we are going to discuss some of the types.

Types of brake fluid

There are two chief types of brake fluids – one is glycol-based, and the other is silicone-based. The basic difference between these two is that glycol-based fluid is for vehicles with Anti-lock Brake System (ABS). And those without ABS are good with silicone-based fluid. In any case, switching the brake fluids is something that compromises the performance of the braking system. Therefore, experts do not recommend vehicles with the glycol-based fluid switch to silicone-based. These fluids are classified by the Department of Transport (DOT), out of which the major three types are DOT3, DOT4 brake fluid, and DOT5. Here, we have got you covered if you are looking to buy brake fluid in Dubai and are unsure of when to change and how much it will cost. Keep reading further, and you will know.

Before brake fluid change

The significant characteristics of brake fluids are viscosity, boiling point, corrosion, and compressibility. And, failure of even one causes the failure of the brake system overall. For example, if you test a newly replaced fluid after 12 months, you can see 2 per cent of water content, which slowly accelerates the process of corrosion. Excessive water content thereby decreases the boiling water, which further leads to brake system failure. Other than that, water corrodes other brake components as well. So, how often should you change or replace the brake fluids? Well, the answer to this question completely depends on your vehicle’s model, its upkeep, driving condition, and the manufacturer’s recommendations. Experts suggest it once a year. But low fluid level, burnt odour, and transparent fluid are some signals to check or consult an expert. You can check brake fluid change cost or continue reading about these fluids.

DOT5 & DOT4 brake fluid

Department of Transport (DOT) segregates chief components of these fluids with a few ratings. Pre-DOT and DOT2 have their chief components as castor oil or alcohol. Further, DOT3, DOT4, and DOT5.1 are glycol-based fluids. Last, DOT5 is the only silicone-based fluid. There are some things to consider if you choose to maintain your vehicle all by yourself. First is never mix the DOT ratings but sometimes adding higher rating results in a higher boiling point, which is good. The second is never to mix glycol and silicone fluids. However, you can mix different brands of the same rating and the same chief component. Still, choose only top-notch brands while buying brake fluid online. Some of the go-to brands are definitely Motul, Castrol, Shimano, Prestone, and Amsoil.

Brake fluid with chlorine

Here, we would like your attention to the dangers associated with the fluid. You should never try to mix different ratings of DOT; you must not try adding other elements as well. You might see many experiments online related to mixing the fluid with swimming chlorine. If you are up for this experiment, just make sure that you are inside a laboratory and with all your safety gear. This experiment results in 5-30 seconds of explosion and could be a fireball you can see. Other than that, you must maintain the utmost care while braking fluid change. Any discrepancy can lead to vehicle or handler damage. It would be better if you called an expert for any purpose. Speaking of buying the best brake fluid, we have some highlights for you to consider.

All products in Brake Fluids